AFR SBC 180cc Street Heads ***Eliminator Series***

$1,589.00
Sale: $1,636.67
Save: -3% off

AFR's new Eliminator Series 180's are now Available! Features include:

  • Lightweight AFR LS1 Style Valvetrain - 40 Grams of reduced mass where it matters most! 400 rpm dyno test improvement before valve float! Increased power, increased RPM, better durability.
  • Improved casting for a stronger head and improved oil drainback.
  • Improved cylinder ports! The New AFR Eliminator series flows better as cast than the previous version's competition port - 275 cfm at .600"! This head has picked up flow across the entire range and has kept the same port size for incredible velocity.
  • Dyno testing provided peak increases of 28 average hp and 27 average ft/lb of torque!

We carry the following AFR part numbers as STOCKING Options:

AFR 180cc Street Heads, Straight Plug w/heat riser, 75cc 0911

AFR 180cc Street Heads, Straight Plug w/heat riser, 65cc 0916

AFR 180cc Street Heads, L98 Angle Plug w/heat riser, 65cc 0918

AFR 180cc SBC Street Cylinder Head

AFR 180cc SBC Eliminator Street Cylinder Head

The Small Port, High Velocity Torque Monster

 

AFR 180cc SBC Cylinder Head
Click to enlarge

The Emissions Legal (versions from 1969-94 with heat riser, CARB EO #D-250-2), 180cc intake port small block Chevy eliminator cylinder heads are available in your choice of straight or L98 angle plug versions. These performance heads feature a 75cc or 65cc combustion chamber with a 64cc exhaust port and a 3/4” thick head deck (ideal for nitrous or blower applications.) Standard valves are lightweight 8mm 2.020 intake and 1.600 exhaust with AFR’s hardened ductile iron interlocking valve seats. The exceptional flow characteristics, ideal operating range of idle to 5500 rpm (higher rpm ranges possible depending on combination of parts), 23° valve angle, and standard valve spacing make this the perfect street aluminum cylinder head for 327 cid to 350 cid engines from 1955-86. Also available for 1987 to present engines with center bolt valve covers and 2 center intake bolts at 72° angle, AFR Part #0919. No special parts are required (see footnotes here). Vortec style cylinder heads available too. Dual valve cover bolt pattern is standard. Exhaust port is raised .100 over GM L98 cylinder heads.

Note:

Hydraulic roller cams typically experience valve float at 6200-6400 rpm because of their fast ramp rates. AFR suggest you upgrade your springs to AFR part #8019, 1.270 O.D. with higher spring pressures and use our Patented “Hydra Rev Kit” to reduce chances of valve float associated with rpm 6200 or higher.

180cc SBC Street Aluminum Cylinder Head Flow Chart

Tested on 4.060 Bore

AFR 180cc SBC Cylinder Head Flow Chart

180cc SBC Competition Package Cylinder Head Flow Chart

Tested on 4.060 Bore

AFR 180cc SBC Competition Cylinder Head Flow Chart


 

Basic Package Components
100% CNC Ported Combustion Chambers
100% CNC Ported Exhaust Ports
100% CNC Ported Intake Ports
Competition 5-Angle Valve Job
AFR #7251Bead Lock Intake Valve, 2.020" Standard Length
AFR #7250Bead Lock Exhaust Valve, 1.600" Standard Length
AFR #80171.290" OD Hydraulic Dual Valve Spring,
135 lbs on seat, .600" maximum lift
AFR #80191.270" OD Hydraulic Dual Valve Spring,
155 lbs. on seat, .650" maximum lift (standard on competition head)
AFR #85147° Chrome Moly Retainers
AFR #90077° Bead Lock Valve Keepers
AFR #64103/8" Rocker Studs
AFR #6103Guide Plates
AFR #6612Viton Valve Seals
AFR #8042Hardened Spring Cup
AFR #9060Intake Valve Seats
AFR #9070Exhaust Valve Seats
AFR #9051Bronze Valve Guides




 

Specifications, Features, and Optional Supporting Components
65-70 ft. lbsHead Torque
55-60 ft. lbsRocker Stud Torque
AFR #6817Intake Port Gasket, 1.230" X 1.990" w/ 3/8" radius, Fel-Pro #1256
Important: Do not port match your intake manifold to Fel-Pro gasket as it does not precisely fit AFR heads.
AFR #6834Exhaust Port Gasket, Fel-Pro #1404
AFR #6800Head Gasket, 350cid Fel-Pro #1003
AFR #6802Head Gasket, 400cid Fel-Pro #1014
AFR #6310SB Chevy Head Bolt Kit, ARP #134-3701
AFR #6305SB Chevy Head Stud Kit, 12 Point Nuts, ARP #234-4301
AFR #6320Head Bolt Washers, Manley
AFR #6200Stud Girdle GM L98
Edelbrock #3701Suggested Manifold
AC FR3LS or 41629Spark Plug Starting Range
65cc or 75ccCombustion Chambers
Can be cut to 1.625, no deeperSpring Pocket
Standard GM L98 Valve Spacing
Standard, GM L98Rocker Arms
23°Valve Angle
.008" per ccAngle Mill (Milling options available)
.006" per ccFlat Mill (Milling options available)

Note: Milling head deck will affect flow numbers. Angle mills might require .120 thick intake gasket.


Add to Cart:

  • Model: 0911
  • Shipping Weight: 68lbs

Please Choose:

Chamber Size